How To Use Tambour Hooks
There is some uncertainty about the origins of the tambour hook,
opinions varying as to whether it originated in China or India.
Chain stitch can be produced with great speed using the tambour hook.
The technique is generally used with a frame (the name tambour comes
from the tambour -drum frame). The size of the hook varies according
to different work requirements. The hook is put through the fabric,
the art silk thread put on the hook, the hook is turned through 90
degrees and pulled up through the fabric to the surface. The hook is then
turned back through the 90 degrees (reverse action) to the starting
point. The stitching is begun with a knot, a twist in the first chain
stitch or a chain stitch worked back on itself. To finish off, the
embroiderer makes a couple of chains on the surface through the lead
thread, with an action like that used in crotchet. When a line or
area of stitches has been completed, and another stitched area is
to be worked, a long thread is left trailing from one area to the
other on the reverse side of the fabric. The next stitch can be worked
away from this new point, starting with a chain stitch. If the next
line is some distance away, or a new colour is to be used, the thread
is cut.
Cut beads from Sadi, or use beads of choice. shisha, sequins and pieces of sadi may be applied using the tambour hook. They are applied
individually to the right side of the fabric.
The hook is disconnected from the thread when a sadi bead or sequin is
to be attached. The sadi is pushed high onto the hook, and the hook
is then pushed through the fabric to engage the thread in the usual
way. When the hook returns to the surface, the thread is pulled through
the bead before entering the fabric again to make the next stitch.
If the next stitch is to have a sadi piece, the hook is disconnected so
that the sadi bead can be placed on the hook.
Deena Gillies Tips
Always hold the hook straight up and down (vertically) on the top side of your work when you are stitching. The set screw
always faces the direction in which you are stitching. The other hand is under the fabric and feeds the thread onto the hook for each stitch.
Starting the threads:
There are a number of ways to start the work – the two use most often when learning are:
- A small knot in the end of the thread can be used to secure it.
- Leave a 2” tail at the back of your work as you begin, this will be woven into the threads as you work thus securing them.
Insert the hook through the fabric, catch up the thread on the underside and pull it through to the right side of your work creating a loop.
If you apply a little backwards pressure against the fabric as you bring hook to the topside of your work you will find it less likely
to catch on the fabric as you work.
Re-insert the hook through the fabric and repeat the process of catching the thread on the underside of the fabric and bring it
back to the working surface and slip the new loop through the old to form the chain.
Continue in this manner until the design area is covered.
Finishing the threads:
To finish off you can either:
- After working the last loop pull the thread tail through to the right side of the work and using a needle thread it
down over the last loop (as we do with a lazy daisy stitch) thus securing it and then weave the remaining tail end
through a few stitches at the back of your work to secure it.
- Insert the hook through the fabric from the underside of your work and pull through the last loop. Feed the tail
end of your thread through this loop thus making a knot and weave the remaining tail section through a few of the stitches
at the back of your work to secure it.
When learning this technique you will make it easier on yourself if you work with tightly twisted threads.
Once you have become familiar with the technique you will find this an exciting and quick method of embroidery!